Features
ESC
- Excellent over-current capability. Adopts the best PCB material and PCB production process - such as application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB. 6-layer layout design of the board, compared with other common 4 layers. Can withstand bigger currents.
- Extremely stable support of 6S LiPo battery by use of 24 pcs of new Toshiba standard 40V 5x6 Mosfets & imported from USA or Japan electronic materials. Advanced lead-free SMT Processing technology makes ESC fully support 6s battery and get better performance.
- Excellent heat dissipation performance. The CNC hollow aluminum alloy shell is great for heat dissipation.
- Better control performance - flashed with the latest BLHeli_32 firmware in the factory, support telemetry functions (including voltage, RPMS & current )
Specifications
H743 HD FC
- MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
- Gyro: BMI270 dual
- Baro: BMP280
- OSD: AT7456E
- Blackbox: 16M
- 8x Uarts (1,2,3,4,6,7,8) with built-in inversion.
- 8x PWM outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- USB Type-C(USB2.0)
- 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
- 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
- Dual Camera Inputs switch
- VTX 10V/Vbat filtered power ON/OFF switch
- DJI FPV OSD is supported by any spare UART
- Vbat Input: 7~25V (2~6S LiPo)
- BEC: 5V 2A Continuous (Max 3A)
LDO 3.3V: Max 250mA - Firmware: Betaflight - SKYSTARSH7HD
- Mounting: 30.5 x 30.5mm
- Dimensions: 39.5 x 39.5 x 7.8 mm
- Weight: 10.1g
KM60 60A BLHeli_32 4-in-1 ESC - 30x30
- Input voltage: 3-6S LiPo
- Con.Current: 60A
- Peak Current: 80A≥ 10S
- Firmware: BLHeli_32
- Support: Dshot 600/1200
Mounting hole: 30.5mm/M3 - BEC: No
- Product size: 41*46*7.6mm
- Weight: 18g